Your stage,
piece by piece.

Achat 208 HR the box pro

Passive horn-loaded 2×8” mid/high cabinet, from 150 Hz up: it always works on top of a sub. Horn on the right; with the HL it forms the main system.

Achat 208 HL the box pro

The mirror twin of the HR, horn on the left. 400 W RMS at 16 Ω: two tops per side are wired in parallel on the same channel.

Achat 104 the box pro

Compact two-way 4” speaker, 40 W RMS at 8 Ω. We have 48 of them: the basis of distributed sound and multichannel installations.

Achat 115 Sub the box pro

Passive 15” subwoofer, 500 W RMS at 8 Ω, up to 129 dB. For live shows and medium rooms.

Achat 112 Sub the box pro

Compact 12” subwoofer, 350 W RMS at 4 Ω: discreet, for small rooms and setups where the sub should not be seen.

Achat 110 M the box pro

10” stage monitor, 250 W RMS at 8 Ω, with cover. Up to eight wedges for bands and ensembles; on a stand it doubles as a loudspeaker.

TSA 4000 the t.amp

2-channel amplifier: 1,000 W at 8 Ω, 1,500 W at 4 Ω. The engine of the main system: two 208 tops per channel.

TSA 4-700 the t.amp

4-channel amplifier: 490 W at 8 Ω, 810 W at 4 Ω, stable down to 2 Ω. One channel per sub.

E4-250 the t.amp

4-channel amplifier: 250 W at 8 Ω, 400 W at 4 Ω. The right size for the 110 M wedges and the 12” subs.

E4-130 the t.amp

4-channel amplifier: 130 W at 8 Ω, 200 W at 4 Ω. Ten amplifiers, forty channels: they drive the Achat 104 speakers.

NX3000D Behringer

Digital 2-channel amplifier with on-board DSP: crossover and limiter with no extra units. 440 W at 8 Ω, 900 W at 4 Ω (peak figures).

DSP 204 the t.racks

2-in / 4-out processor: splits the signal between subs and tops, equalises, delays and limits. With the 208s it is essential.

AudioFuse 16Rig Arturia

Audio interface: 16 inputs, 8 line outputs plus the two monitor outs. The heart of multichannel installations and multitrack recordings.

AudioFuse X8 OUT Arturia

ADAT expander: 8 more analogue outputs for the 16Rig, up to 18 independent signals.

Round-base microphone stand Millenium

Straight stand with round base, 88 to 153 cm. For microphones and for the compact speakers.

Sub-to-top spacer pole Roadworx

Puts the top above the sub, at the right height, without tripods.

Speaker cable 10 m (2×2.5) pro snake

10-metre speakon cable for passive loudspeakers.

Speaker cable reel 100 m the sssnake

A hundred metres of cable (1.5 or 2.5 mm²) that we cut and terminate with Amphenol connectors to the measurements of your room.

8-channel loom TRS–XLR the sssnake

8-channel multicore: takes the interface outputs to the amplifier inputs.

8-channel loom TRS–TRS the sssnake

Balanced 8-channel multicore, jacks on both ends.

Signal cable set pro snake · the sssnake

Jack, BNC and optical in one set: what you need to connect sources and processors.

12U rack on wheels Flyht Pro

12-unit flight case on wheels: up to six amplifiers, wired and ready.

8U rack Flyht Pro

8-unit flight case for processors and small amplifiers.

Warm white LED strip 100 m IP65 · 24 V

A hundred metres of silicone LED, indoor and outdoor, split into 50 controllable segments.

32-channel RGBW DMX decoder DMX512

Controls up to 32 LED channels from one DMX line.

Art-Net / DMX node Showtec NET-2/3 Pocket

Two DMX universes over the network (Art-Net and sACN): lights are programmed from the computer, together with sound.

24 V 1,200 W power supply —

Power for the complete LED strip.

Black acoustic drape with hooks —

Black drapes to hang: they close a space and dry up its reverb.

Steel wire 50 m with fittings —

To stretch drapes and LED strips between two points.